Metal-TEC

Online Catalogue | Metal Detectors |  Metal-TEC

Metal-TEC

Metal-TEC

The METAL-TEC was designed to be used as an enhancement of the hand during searches. it can assist in locating with pinpoint accuracy, metal objects which may have been otherwise overlooked. The METAL-TEC requires only one hand for operation leaving the other hand available for more important tasks. It can be held between the fore finger and the thumb freeing up the other fingers so they can be used during a search or frisking of the suspect. The METAL-TEC can find a metal object and pinpoint its location without the need for a constant sweeping motion. There is no adjustment necessary on the unit as its sensitivity is factory pre-set and automatically compensates for temperature changes which may affect sensitivity.

Technical Specifications
Detection: Tri axial detection field, uniformly detects ferrous and non-ferrous metals inches away in all directions, regardless of the position relative to the subject
Sensitivity control: Factory set and calibrated
Indicators: Silent vibration
Controls: Single control (Power On/Off)
Battery: Standard 9 Volt alkaline (provides 2,000 average 15 second searches)
Operating temperatures: - 15F (-26 C) to +130F (+54C)
Humidity: 98% non-condensing
Case Material: High impact ABS plastic with a tensile strength: 6,800psi. (ASTM D 638)
Operating frequency: 360 kHz
Regulatory standards: FCC Part 15 (ID# NJ21200METAL-TEC)
Dimensions: L 7.9"/20.0cm x W 1.75"/4.5cm x H1.30"/3.3cm
Weight: 8.8oz/249.4g
Meets Standards: EN 50082-1:1997 harmonized and EN 50081-2:1993 harmonized

Code: K3062


Online Catalogue | Metal Detectors |  Metal-TEC